User guide

29
Connections – Subscribe to HD
To get the best viewing experience with an HD compatible TV, call 1 866 FibreOP to subscribe to HD. Before you can enjoy HD, you must
update your set top box video settings and connections to your TV.
1
Connect your TV to the set top box as follows:
Video
• To use HDMI, connect the HDMI ports with an HDMI cable
• If you are using component video, connect the video ports using a
three-pronged component Y Pb Pr cable
Audio
• If using HDMI, the audio will transmitted through the same cable as the
video and will transmit Surround Sound and Dolby Digital.
• If you are using an optical (S/PDIF) cable to set up Surround Sound or
Dolby Digital audio, connect home theatre receiver to the set top box
• If you are using an RCA-type audio cable, connect the audio ports
using the red and white leads
Note: If you want to enable Surround Sound or Dolby Digital, access Digital
Audio Output in the Audio section of your settings menu and select the
Surround Sound option. Save your change.
2
Hold down the Power button until the PVR or HD receiver restarts. Wait a few
moments for the FibreOP TV menu to appear.
3
Press the Menu button on the remote and highlight Settings. Press OK.
4
Highlight Television and press OK.
5
Highlight Screen Aspect Ratio and High Definition and press OK.
The Screen aspect ratio and high definition screen appears.
HD channels sometimes show non-HD, standard definition (SD)
content. This content is displayed at a 4:3 aspect ratio with black bars
at the sides of the screen.
Menu
10:03 PM
Settings
General
Television
Audio
Parental controls
Restart System