User guide
21
Settings
9:51 PM
Audio
Digital audio output
Parental controls
Descriptive Video
Audio and Video Settings
Here are some tips for setting up your audio and video equipment to get the best experience from FibreOP TV.
Video Settings
Annoyed by black bars on the top and bottom of your screen? Or perhaps it
seems like part of the picture is cut off? You might need to change the aspect
ratio of your TV screen to match the program you’re watching. For example, most
HD programming is shown in widescreen format (16:9), while most SD programs
are shown in full screen format (4:3).
There are two ways to control how the picture is displayed on screen:
1
By adjusting your TV settings. Please refer to your TV set manual for details.
2
By adjusting your receiver settings in the settings menu under Television and
“Screen aspect ratio and high definition”.
Once you have optimized your TV set and receiver settings for your favorite
channels, you may still find certain programs that you want to adjust. To toggle
your video settings easily, press Enter on the remote while watching
a program and change the options under aspect ratio.
Audio Settings
By accessing the Audio section of the settings menu you can change:
1
Descriptive video: turn descriptive video on or off.
2
Digital audio output: select stereo or surround sound settings.
Settings
9:50 PM
Screen aspect ratio and high denition
Continue
Cancel changes
Choose the aspect ratio and resolution for your TV, then shoose Continue.
4:3 standard denition
Widescreen standard denition
720p on high-denition screens
1080i on high-denition screens
16:9 (Widescreen) format
4:3 (Fullscreen) format