User guide

7
TV Basics
Change TV channels
To change channels:
• Use the numeric keypad to enter the channel number.
OR
• Press the CH/PG (Channel/Page) buttons on the remote.
See what’s playing on other channels or time slots
1
Press one of the arrow buttons on the remote. The browse panel appears at the
bottom of the screen.
2
Use the Up or Down Arrow buttons to step backward or forward through
channels. The browse panel displays the title, a picture-in-picture video for the
current time slot, and information for each channel.
3
Use the Left or Right Arrow buttons to browse programs playing later on the
channel selected in the browse panel. The browse panel displays the title and
more information about future programs.
4
Press OK to watch the program shown in the browse panel or to find out more.
5
Press Exit to close the browse panel and return to your original program in full
screen, or wait 10 seconds and the browse panel will disappear.
Basic TV Navigation
FibreOP TV is easy to use. There are two main interfaces on screen:
1
The Guide: Brings up a grid of channels and time slots. You get to the Guide by
pressing “Guide” on the remote.
2
The Menu: Allows you to access features like search, PVR, video-on-demand,
and settings. You get to the Menu by pressing “Menu” on the remote.
The next few pages will explain the features of The Guide and the Menu in detail.
Swarm
1 HOUR 57 MIN LEFT
8:02 PM
Next:
The Firm
SHOHD 416