User guide

6 6
TV Basics
Learn the basics of controlling your HD PVR or HD receiver.
Turn on your HD PVR or HD receiver
1
Press STB and then Power on your remote, or press Power on the PVR
or receiver.
2
Your remote has four buttons on the top: STB, TV, DVD and AUX.
By pressing these buttons you are changing what device the universal remote
is controlling.
Note that “STB” stands for set top box (your FibreOP TV receiver). In most
cases the installer has configured your STB button to control BOTH the
receiver and your television.
To learn how to program and use more universal remote features,
refer to fibreop.ca/service/support or the Motorola Remote Control
User Guide provided with your FibreOP TV remote.
To turn on your TV and receiver at the same time
1
Press STB on your remote to place it in the mode that controls the TV
and receiver.
2
Press Power on your remote, which will turn on both devices at the same time.
Depending on how you point your remote, this can result in one
device turning on and the other remaining off. To resolve this issue,
press the power button directly on the device that is powered off.