Computer Accessories User Manual

Ordering Information Introduction
PENT/ATCA−717 33
Ordering Information
When ordering the board variants, upgrades and accessories, use the order numbers
given below.
Product Nomenclature
In the following you find the key for the product name extensions.aa
PENT/ATCA−717/xx−yyyy
aa
xx Main memory in GByte
yyyy CPU frequency in MHz
Order Numbers
The table below is an excerpt from the blade’s ordering information. Ask your local
Motorola representative for the current ordering information.
aaaa
Note:aThis manual describes the blades listed below (PCA revision 1.3) and is
delivered with these blades. For blades with other PCA revisions refer to the manuals
that are delivered with those blades.
a
Table 2: Ordering Information
Order Number
PENT/ATCA−717/ Description
123065 2G−1800 Two GByte main memory, 1800 MHz CPU
frequency; (PCA revision 1.3)aa
123066 4G−1800 Four GByte main memory, 1800 MHz CPU
frequency; (PCA revision 1.3)
The table below is an excerpt from the blade’s accessories ordering information. Ask your
local Motorola representative for the current ordering information.
aaaa
Table 3: Accessories Ordering Information
Order Number
Accessory Description
123036 ACC/ARTM−717 Rear transition module for
PENT/ATCA−717 bladesa
Provides access to four serial interfaces
deriving from PMCs as well as two USB
2.0, two serial, two SATA and one
keyboard/mouse interface; supports
PPMC−280 modules installed on the
PENT/ATCA−717
120980 ACC/ATCA−715/HDD Parallel ATA hard disk