Technical information

Interface Connector Specifications
74 G30 - Module Hardware Description December 15, 2009
Interface Connector Specifications
The G30 uses a single 70-pin, 0.5 mm pitch, board to board connector for the application
interface, as described in Table 4-1.
Figure 4-4 shows the G30 interface connector.
Figure 4-4: G30 Interface Connector
Table 4-2 describes the G30 interface connector characteristics.
Table 4-1: G30 interface connector option
G30 Connector Mating Connector Stacking Height
Molex 53748-0708 Molex 52991-0708 3.0 mm
Table 4-2: Interface Connector Specifications
Parameter 53748 (3.0 mm)
Contacts 70
Rows 2
Pitch 0.5 mm
Maximum Current 500 mA
Maximum Voltage 50 V
Contact Resistance 50 mΩ maximum
Insulation
Resistance
100 MΩ minimum
Durability 50 mated cycles
maximum
Stacking Height 3.0 mm
Mates with Molex 52991-0708