Technical information

December 15, 2009 G30 - Module Hardware Description ix
Preface
Manual Scope
This manual provides the electrical, mechanical and environmental requirements for properly
integrating the G30 module in a host application.
This manual gives a complete set of hardware features and functions that may be provided by
G30. The availability of any feature or function, which is described in this manual, depends on
the hardware revision and software version of a specific G30 model.
The parameters and values provided in this manual are defined under typical conditions. These
values may vary when subject to different conditions, such as SW version, network status,
application settings and environmental conditions.
Target Audience
This manual is intended for all members of the integration team who are responsible for
integrating the G30 module into the host OEM device, including representatives from hardware,
software and RF engineering disciplines.
Manual Organization
This manual contains the following chapters:
• Chapter 1—introduces the G30 unit and provides important safety instructions.
• Chapter 2—provides a detailed hardware description of the blocks and components
comprising the G30.
• Chapter 3—describes the pin assignments for G30 connectors.
• Chapter 4—describes G30 mechanical specifications and requirements.
• Chapter 5—provides contact information for Motorola Service Support and Customer
Assistance.
Applicable Documents
• G30 Developer's Kit - 6802986C48
• G30 AT Commands - 6802986C33