Technical information

Bound Signing
D-2 G24 KJAVA User’s Guide July 15, 2008
5. Send the "example.csr" file created in step 2 and the
"G24_Bound_Cert_Request_Form_182-1.doc" created in step 4 to
[e-mail]. You will receive from Motorola a bound certificate within a few
days.
6. Upon receiving the "Bound Certificate" (.crt) file from Motorola, you should create a
directory for G24 in the following location: C:\BOUND_Certificate\cert\G24.
7. Place the "Bound Certificate" (.crt) file at the following location:
C:\BOUND_Certificate\cert\G24
It is important to preserve the above path since an automatic tool relays on it.
8. Open a command window and run the "BoundSign.bat" batch file as follows:
BoundSign.bat UserMIDlet 182-1.X
Where:
- "UserMIDlet" is the name of your midlet (without the jad or jar suffix).
- "182-1.X" is the certificate file name you received from Motorola without the crt suffix.
The "BoundSign.bat" batch file performs all the steps listed in chapter 2.2.6 of
"Signing a MIDlet with a BOUND Certificate (External Release)" document.