Technical information

Packages Overview
5-14 G24 KJAVA User’s Guide July 15, 2008
A2D Classes
1. A2dManager - Manages the access to A2D converters.
2. A2dChannel - A2D converter configuration and notification (access to A2D value,
Enable/Disable notification).
3. A2dAutoPeriodConfig - A2D period notification container, default period is 4 sec.
4. A2dAutoThresholdConfig - A2D threshold notification container.
Default value for "low limit range" - 50 to 60 and "high limit range" - 190 to 200.
Call Package
Package name: com.motorola.oem.call
This package enables the UM to perform a single MO/MT voice or data call.
Contains: interface "DataCallConnection" and classes "Call" and "DataCallConfig".
The interface "DataCallConnection" is based on the Generic Connection Framework and extends
the StreamConnection interface.
The major features of the package are:
• Dial, Answer or release a call.
• Indicates call direction, number and type.
• Report call state and call exit cause.
• Configure air link parameters for the next MO data call.
• Get Radio Link Protocol parameters range to be used in air link configuration.
• Several events type Voice/Data call alerts and state change events.
I2C Package
Package name: com.motorola.oem.i2c
I2C package provides standard GCF API to communicate with I2C driven peripherals.
I2C serial bus is available through two GPIO lines.
The following table defines mapping of I2C bus lines to GPIO lines in G24 70 pins connector.
I2C API utilities
:
• Create connection
• Close connection
• Open new Datagram
• Connection configuration
• Provide data transfer mechanism to devices on the bus - read / write
• General call address
BUS Identifier SDA SCL
BUS0 (default bus)
32 34
BUS1
32 34