Technical information

Packages Overview
5-4 G24 KJAVA User’s Guide July 15, 2008
OSC System Properties
The OSC system properties are listed in Table 5-2.
Sleep Mode
G24 will enter sleep mode once it is enabled and idle state is reached (no I/O interrupts and RF
activities).
Unit current consumption while in sleep mode is 3.5mA @ DRX9.
Table 5-2: OSC System Properties
Property name Description Possible values
Default
value
Available
for get/set
method
oem.lastfault.running UM/DM Last run fault
information.
NA NA Get
oem.lastfault.panic Last panic information. NA NA Get
oem.lastfault.ota Last OTA fault information. NA NA Get
oem.lastfault.reportaddre
ssX
Report destination address
(X: 1 to 3).
Refer to “APPENDIX B -
DEFAULT MIDlet
FEATURES”
NA Set, get
oem.logs.ams.available
oem.logs.stdout.available
AMS logs
Standard output logs
ON, OFF ON Set, get
oem.logs.ams.route
oem.logs.stdout.route
Serial port for log USB, UART1, UART2 UART2 Set, get
oem.mode Java or AT operation mode
See
Table 3-2
NA Set, get
oem.dm.smslistener DM SMS Listener ON, OFF ON Set, get
oem.dm.updateurl Update URL for download the dm NA NA Set, get
oem.audio.digital Audio to be used: digital or analog ON, OFF ON Set, get
oem.hw.module Hardware configuration OEM, HMI NA Get
oem.hw.imei Product IMEI NA NA Get
oem.version.software Software version NA NA Get
oem.version.flex Flex Version NA NA Get
oem.version.dm DM version number NA NA Get
oem.version.um UM version number NA NA Get
oem.kmgrpin.timesample Kmgr pin time sample.
Valid for the next power cycle.
See
“Sleep Mode” for more
details.
"disable"->0ms "level1"
->0.5ms
"level2" ->5 ms
"level3" -> 10 ms
"level4" ->20 ms
"level1" Set, get