Technical information

Chapter 3: KJAVA Architecture
July 15, 2008 G24 KJAVA User’s Guide 3-5
JTool Manager
JTool Manager enables users to communicate with the G24 KJAVA module via RS232 over
UART2 using a set of predefined commands (refer to “Default RS232 Configuration”).
JTool Manager functionality:
1. Downloading a MIDlet via Jadpur or MIDway.
2. Reflashing of G24 software.
3. KDWP activation.
4. Module configuration.
Default RS232 configuration
:
Baud Rate = Default baud rate (value 19200 bps);
Data Bits = 8 bit;
Parity = NONE;
Stop Bits = ONE STOP BIT;
Flow Control = HW (Auto CTS/RTS)
See “JTool Commands” section for more details