Specifications

2.6.1 The PC as Data Terminal Equipment (DTE)
The software application for using the PC RS232 standard serial interface (COM-port) as Data
Terminal Equipment (DTE) is usually Hyper Terminal. Connect using the COM-port to which the
Java Box Terminal is connected with the following settings:
2.6.2 RS232 number 2__ Interface G24 UART2 or GPS
The serial interface RS232 number 2 of the Java Box Terminal is intended for the communication
between the G24 GSM module UART2 and the host application. This RS-232 interface is a data and
control interface for transmitting data, AT commands and providing multiplexed channels.
Alternative the serial interface RS232 number 2 of the Java Box Terminal can be switch with SW2 to be
connect to the GPS.
Java Box Terminal Hardware Interface Description
Released