Technical information

Core AT Commands
2-16 AT Commands Reference Manual August 5, 2008
P This command is supported for backward compatibility only, and
has no effect.
Page 3-451
Q This command determines whether to output/suppress the result
codes.
Page 3-282
READY This unsolicited notification indicates UART is ready.
Page 3-217
Sn This command reads/writes values of the S-registers, and includes
registers 1-49, 94, 96 (Audio) and 102 (Sleep mode).
Page 3-285
T This command is supported for backward compatibility only, and
has no effect.
Page 3-451
V This command determines the response format of the data adapter
and the contents of the header and trailer transmitted with the result
codes and information responses.
Page 3-281
X This command defines the data adaptor response set, and the
CONNECT result code format.
Page 3-284
Y This command is supported for backward compatibility only, and
has no effect.
Page 3-451
Z This command resets the default configuration.
Page 3-290
Table 2-1: Core AT Commands (Cont.)
AT Command Description Page