Technical information

Core AT Commands
2-12 AT Commands Reference Manual August 5, 2008
+FTPCWD
This command causes the G24 to request the remote FTP
server to change the working directory.
Page 3-435
+FTPDEL
This command causes the G24 to request the remote FTP
server to delete a file.
Page 3-440
+FTPINFO
This command causes the G24 to enable or disable FTP
unsolicited indication to the user.
Page 3-434
+FTPLIST
This command causes the G24 to request the remote FTP
server to send a list.
Page 3-443
+FTPMKD
This command causes the G24 to request the remote FTP
server to create a new directory.
Page 3-437
+FTPNOOP
This command causes the G24 to request the remote FTP
server to do nothing.
Page 3-447
+FTPOPEN
This command causes G24 to open a FTP connection with a
remote FTP server.
Page 3-431
+FTPPWD
This command causes G24 to request the remote FTP server
to return the working directory name.
Page 3-439
+FTPREN
This command causes the G24 to request the remote FTP
server to rename a file.
Page 3-441
+FTPRETR
This command causes the G24 to request the remote FTP
server to send a file to the G24.
Page 3-449
+FTPRMD
This command causes the G24 to request the remote FTP
server to remove a directory.
Page 3-438
+FTPSTAT
This command causes the G24 to request the remote FTP
server to send status.
Page 3-444
+FTPSTOR
This command causes the G24 to request the remote FTP
server to store a file.
Page 3-448
+FTPSYST
This command causes the G24 to request the remote FTP
server to send the operating system type.
Page 3-446
+GCAP This command requests the overall capabilities of the G24.
Page 3-203
+GMI This command requests manufacturer identification. The command
is not supported when the SIM is missing.
Page 3-1
+GMM This command requests the model identification.
Page 3-2
+GMR This command requests the revision identification.
Page 3-3
+GSN This command requests the product serial number identification.
Page 3-3
+IFC This command controls the operation of the local flow control
between the terminal and the G24.
Page 3-459
+IPR This command is responsible for setting and saving the request
baud rate.
Page 3-201
Table 2-1: Core AT Commands (Cont.)
AT Command Description Page