Technical information

AT Commands Summary
1-36 AT Commands Reference Manual August 5, 2008
+MIPDATA
This unsolicited event is sent to the terminal indicating a data
comes from Network when G24 is in pseudo-command
mode.
Page 3-410
+MIPXOFF This unsolicited event is sent to the terminal to stop sending data.
Page 3-410
+MIPXON This unsolicited event is sent to the terminal when the G24 has free
memory in the accumulating buffer.
Page 3-411
+MPING This command will allow verifying IP connectivity to another
remote machine (computer) by sending one or more Internet Control
Message Protocol (ICMP) Echo Request messages.
Page 3-414
+MPINGSTAT This is the unsolicited response that the G24 sends to the terminal to
inform of ping execution status update and provides summary
statistics of ping request when ping request execution is completed.
Page 3-418
+MSDNS This command set/read DNS IP address for each socket.
Page 3-421
+MIPCFF This command allows configuring the incoming TCP connection
filtering feature parameters, such as list of allowed IP addresses or
disabling/enabling the filtering.
Page 3-426
+MIPCSC This AT command is used to configure the SSL feature behavior in
case of non - fatal alerts.
Page 3-423
+MIPSSL This unsolicited event is sent to the terminal indicating an errors,
warnings or alerts that occurred during SSL connection.
Page 3-428
FTP Commands
+FTPCDUP
This command causes the G24 to request the remote FTP
server to change the working directory up.
Page 3-440
+FTPCLOSE
This command causes G24 to close FTP connection. Page 3-433
+FTPCWD
This command causes the G24 to request the remote FTP
server to change the working directory.
Page 3-435
+FTPDEL
This command causes the G24 to request the remote FTP
server to delete a file.
Page 3-440
+FTPINFO
This command causes the G24 to enable or disable FTP
unsolicited indication to the user.
Page 3-434
+FTPLIST
This command causes the G24 to request the remote FTP
server to send a list.
Page 3-443
+FTPMKD
This command causes the G24 to request the remote FTP
server to create a new directory.
Page 3-437
+FTPNOOP
This command causes the G24 to request the remote FTP
server to do nothing.
Page 3-447
+FTPOPEN
This command causes G24 to open a FTP connection with a
remote FTP server.
Page 3-431
+FTPPWD
This command causes G24 to request the remote FTP server
to return the working directory name.
Page 3-439
Table 1-1: AT Commands (Cont.)
AT Command Description Page