Technical information

Chapter 1: Product Features
August 5, 2008 AT Commands Reference Manual 1-33
&F This command restores the factory default configuration profile.
Page 3-289
Z This command resets the default configuration.
Page 3-290
Sleep Mode Commands
S24 This S-parameter activates/disables the Sleep mode. If the parameter
value is greater than 0, it represent the number of seconds till the
G24 enters sleep mode.
Page 3-293
S102 This S-register sets the value of the delay before sending the data to
the terminal.
Page 3-294
+MSCTS This command defines the behavior of the CTS line when the G24 is
in Sleep mode.
Page 3-296
Error Handling Commands
+CMEE This command enables/disables the use of result code +CME
ERROR: <err> as an indication of an error relating to the
functionality of the G24.
Page 3-297
+CEER This command returns an extended error report containing one or
more lines of information text, determined by the manufacturer,
providing the reasons for the
call-clearing errors.
Page 3-304
+MGEER This command returns the PDP context activation reject cause.
Page 3-307
RS232 Multiplexer Commands
+CMUX This command is used to enable/disable the GSM MUX
multiplexing protocol stack.
Page 3-467
User Interface
+CRSM This command provides limited access to the Elementary Files on
the SIM.
Page 3-310
&V This command displays the current active configuration and stored
user profiles.
Page 3-315
&W This command stores the user profile.
Page 3-316
&Y This command displays the default user profile.
Page 3-318
+CKPD This command emulates key presses, or virtual keycodes, as if
entered from the G24 keypad or from a remote handset.
Page 3-318
+MKPD This command enables accessories to control the press and release
of key presses.
Page 3-320
+CMER This command enables an external accessory to receive key press
information from the G24’s internal keypad.
Page 3-322
+CLAN This command handles the selection of language in the ME.
Page 3-323
+CIND This command is used to query the status of various ME indicators.
Page 3-324
Table 1-1: AT Commands (Cont.)
AT Command Description Page