Technical information

Appendix A: Reference Tables
August 5, 2008 AT Commands Reference Manual A-23
AT Commands Behaviour When UART 2 Has Full
Functionality
The following table shows all AT commands behaviour in case that the second UART has full
functionality.
T
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
V
This command determines the
response format of the data
adapter and the contents of the
header and trailer transmitted
with the result codes and
information responses.
Page 3-281
X
This command defines the data
adaptor response set, and the
CONNECT result code format.
Page 3-284
Y
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
Z
This command resets the default
configuration.
Page 3-290
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page
Table A-2: AT Commands Behaviour With UART2 Fully Functional
AT Command
Operate
With Each
UART
Separately
Saved in
Flex
Note
$
Display only
%C
Backward compatible
&C
UART1 only
&D
UART1 only
&F
XX
&G
Backward compatible
&J
Backward compatible
&K
X
&L
Backward compatible
&M
Backward compatible