Technical information

AT Commands Alphabetical Summary
A-22 AT Commands Reference Manual August 5, 2008
I
This command requests various
G24 information items.
Page 3-6
L
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
M
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
N
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
O
This command returns a phone to
the Online Data mode and issues
a CONNECT or CONNECT
<text> result code.
Page 3-34
P
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
Q
This command determines
whether to output/suppress the
result codes.
Page 3-282
READY
This unsolicited notification
indicates UART is ready.
Page 3-217
RING
This unsolicited event is received
when an incoming call (voice,
data or fax) is indicated by the
cellular network.
Page 3-19
S102
This S-register sets the value of
the delay before sending the data
to the terminal.
Page 3-294
S24
This S-parameter
activates/disables the Sleep
mode. If the parameter value is
greater than 0, it represent the
number of seconds till the G24
enters sleep mode.
Page 3-293
S94
This S-parameter represents the
Boolean status, On/Off, of the
sidetone feature.
Page 3-241
S96
This S-parameter represents the
Boolean status, On/Off, of the
echo cancelling feature in the
handsfree.
Page 3-242
Sn
This command reads/writes
values of the S-registers, and
includes registers 1-49.
Page 3-285
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page