Technical information

AT Commands Alphabetical Summary
A-20 AT Commands Reference Manual August 5, 2008
+MTDTR
This command checks and
outputs the physical current
status of the DTR pin of the
RS232.
Page 3-203
+MTKC
This unsolicited event notifies the
terminal when supplementary
services, SMS Control or Call
Control are modified.
Page 3-393
+MTKE
This command enables/disables
the SIM ToolKit functionalities.
Page 3-375
+MTKM
This is both a command and an
unsolicited event. The command
selects items from the menu.
Page 3-391
+MTKP
This is both a command and an
unsolicited event. The command
responds to an unsolicited event.
Page 3-376
+MTKR
This command displays the
profile that is downloaded from
the G24 to the SIM during the
SIM initialization process.
Page 3-366
+MTTY
This command is used to
enable/disable the TTY (Tele
Typewriter) support in the G24.
Page 3-44
+MUPB
This command causes the G24 to
send an event when a phone book
entry is accessed or modified by
the user.
Page 3-330
+MVC
This AT command is used to
choose and configure the
priority order of the supported
voice codecs (vocoders).
Page 3-43
+MVREF
This command defines the
behavior of Vref regulator.
Page 3-233
+TADIAG
This command queries actual
ADC values of the antennas.
Page 3-216
+TASW
This command controls the
antenna switch mechanism.
Page 3-215
+TCLCC
This command displays a list of
all current G24 calls and their
statuses, and also
enables/disables the unsolicited
indication of the call list.
Page 3-51
+TPIN
This command queries the
number of remaining SIM
PIN/PUK entering attempts.
Page 3-263
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page