Technical information

AT Commands Alphabetical Summary
A-14 AT Commands Reference Manual August 5, 2008
+MCEG
This command disables / enables
EDGE support in G24 modules
with EDGE support capability.
Page 3-364
+MCELL
This command displays
information about the Cellular
Network.
Page 3-182
+MCSAT
This command
enables/disables/exercises SMS
alert tone for an arriving SMS.
Page 3-137
+MCSN
This command sets EFmsisdn in
the SIM.
Page 3-81
+MCST
This command displays the
current state of the call
processing, and also
enables/disables the unsolicited
indication of any change in the
call processing state.
Page 3-49
+MCWAKE
This command requests reports
on the status of the GPRS/GSM
coverage.
Page 3-208
+MDBGD
This command sets general
definitions for date book.
Page 3-88
+MDBR
This command recalls date book
entries from a specific entry
number, or from a range of
entries.
Page 3-89
+MDBW
This command stores a new entry
in the phone book, or updates an
existing entry from the date book.
Page 3-91
+MDBWE
This command deletes an
existing entry from date book and
adds or deletes exception
instance of an existing entry from
date book.
Page 3-93
+MDC
This command enables you to
select the desired messages to be
displayed upon connection of a
voice call with a remote party.
Page 3-38
+MDLC
This command establishes PPP
link over serial port.
Page 3-345
+MDMIC
This command enables/disables
the setting of microphone gain
values by +MMICG in digital
audio mode.
Page 3-252
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page