Technical information

Appendix A: Reference Tables
August 5, 2008 AT Commands Reference Manual A-11
+FIT
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
+FMI
This command requests
manufacturer identification.
Page 3-1
+FMM
This command requests the
model identification.
Page 3-2
+FMR
This command requests the
revision identification.
Page 3-3
+FRH
This command causes the G24 to
receive HDLC framed data and
deliver the next received frame to
the terminal.
Page 3-459
+FRM
This command causes the G24 to
enter the receive mode.
Page 3-457
+FRS
This command causes the G24 to
listen and to report back an OK
result code when the line has
been silent for the specified
amount of time.
Page 3-454
+FTH
This command causes the G24 to
transmit data framed in the
HDLC protocol.
Page 3-457
+FTM
This command causes the G24 to
transmit data.
Page 3-455
+FTPCDUP
This command causes the
G24 to request the remote
FTP server to change the
working directory up.
Page 3-440
+FTPCLOSE
This command causes G24 to
close FTP connection.
Page 3-433
+FTPCWD
This command causes the
G24 to request the remote
FTP server to change the
working directory.
Page 3-435
+FTPDEL
This command causes the
G24 to request the remote
FTP server to delete a file.
Page 3-440
+FTPINFO
This command causes the
G24 to enable or disable FTP
unsolicited indication to the
user.
Page 3-434
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page