Technical information

AT Commands Summary
1-28 AT Commands Reference Manual August 5, 2008
+CMGL This command displays a list of SMS messages stored in the G24
memory.
Page 3-114
+MMGL This command displays a list of SMS messages stored in the G24
memory.
Page 3-114
+CMGR This command reads selected SMS messages from the G24 memory.
Page 3-118
+MMGR This command reads selected SMS messages from the G24 memory.
Page 3-118
+MMAR This command changes the status of an SMS message in the G24
memory from "REC UNREAD" to "REC READ".
Page 3-125
+CMSS This command selects and sends pre-stored messages from the
message storage.
Page 3-125
+CMGW This command writes and saves messages in the G24 memory.
Page 3-127
+CMGD This command deletes messages from the G24 memory.
Page 3-132
+CGSMS This command handles the selection of the service or service
preference used by the G24 to send mobile-originated SMS
messages.
Page 3-133
+CMGS This command sends an SM from the G24 to the network.
Page 3-134
+CSCB This command handles the selection of cell broadcast message types
and data coding schemes received by the G24.
Page 3-135
+CMT This unsolicited message forwards the SMS upon its arrival.
Page 3-108
+CBM This unsolicited message forwards the SMS upon its arrival.
Page 3-108
+MCSAT This command enables/disables/exercises SMS alert tone for an
arriving SMS.
Page 3-137
+TSMSRET This command controls the SMS sending retry.
Page 3-143
+MRICS This command allows configuring the behavior of RI line in a case
of SMS arrival.
Page 3-143
Email
Email Commands
+MEMAS This command is used for Email account settings.
Page 3-151
+MEMD This command is used to delete an Email message.
Page 3-164
+MEMDE This command is used to download an Email message.
Page 3-155
+MEMISP This command is used for Email account ISP settings.
Page 3-150
+MEMGS This command is used for Email account general settings.
Page 3-153
+MEML This command is used to list Email messages.
Page 3-160
+MEMSE This command is used to send an Email message.
Page 3-157
+MEMR This command is used to read an Email message.
Page 3-163
+MEMW This command is used to write or update an Email message.
Page 3-166
Table 1-1: AT Commands (Cont.)
AT Command Description Page