Technical information

AT Commands Alphabetical Summary
A-2 AT Commands Reference Manual August 5, 2008
&G
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
&J
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
&K
This command configures the
RTS/CTS flow control.
Page 3-204
&L
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
&M
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
&P
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
&Q
This command selects the
asynchronous mode, and has no
effect.
Page 3-35
&R
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
&S
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
&T
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
&V This command displays the
current active configuration and
stored user profiles.
Page 3-315
&W This command stores the user
profile.
Page 3-316
&Y This command displays the
default user profile.
Page 3-318
?
This command displays the most
recently updated value stored in
the S-register.
Page 3-289
\A
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
\B
This command is supported for
backward compatibility only, and
has no effect.
Page 3-451
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page