Technical information

Chapter 3: AT Commands Reference
August 5, 2008 AT Commands Reference Manual 3-435
AT+CMEE=2
OK
AT+FTPCLOSE
+CME ERROR: FTP session is inactive
+FTPINFO, FTP Unsolicited Indication Enable/Disable
This command causes the G24 to enable or disable FTP unsolicited indication to the user. FTP
unsolicited indication is used for debugging the FTP session and, when the indication is enabled,
the G24 will show the user all FTP commands sent to the remote site and all FTP responses
received from the remote side.
The following table shows the +FTPINFO parameters.
Command
Type
Syntax Response/Action Remarks
Set
+FTPINFO=<indication> OK
Or:
ERROR: <error_code>
Enables/disables FTP
unsolicited indication:
0 - Indication disabled
1 - Indication enabled
When indication is
enabled, G24 will send the
user all FTP commands
and responses using the
following unsolicited
response format:
+FTPINFO: <data>
Read
+FTPINFO? +FTPINFO: <indication>
OK
Returns FTP indication
status:
0 - Indication disabled
1 - Indication enabled
Test
+FTPINFO=? +FTPINFO: (range of supported
<indication_status>s)
OK
Return command format.
Table 3-285: +FTPINFO Parameters
<Parameter> Description Range
Indication status FTP unsolicited indication
status.
Numeric in 0-1 range.