Technical information

Chapter 3: AT Commands Reference
August 5, 2008 AT Commands Reference Manual 3-381
Command Type Syntax Response/Action Remarks
Set
AT+MTKP=<Cmd
Type>,<Result>
[,<Data>]
OK
or:
+CME ERROR: <err>
The Set command allows
the user to answer the
following proactive
commands:
• GET_INKEY Key
pressed from the user.
•GET_INPUT Message
entered by the user.
• Enable/disable the
DTMF service by the
user.
• Launch browser.
• Set up event kist.