Technical information

Chapter 3: AT Commands Reference
August 5, 2008 AT Commands Reference Manual 3-183
The following table shows the +MCELL parameters.
Table 3-108: +
MCELL Parameters
<Parameter> Description
<mode> 0 One shot requested.
<screen_num> The requested screen number - An integer number.
1 Serving Idle Information screen
2 Circuit Switched Serving Cell Information screen
3 Miscellaneous Information screen
4 Uplink Data Transfer screen
5 Downlink Data Transfer screen
6 Neighbor 1 Cell Information screen
7 Neighbor 2 Cell Information screen
8 Neighbor 3 Cell Information screen
9 Neighbor 4 Cell Information screen
10 Neighbor 5 Cell Information screen
11 Neighbor 6 Cell Information screen
12 Neighbor Cells Summary screen
13 Re-selection screen
14 Hopping Information screen
15 PDP1 Context Information screen
16 PDP2 Context Information screen
17 PDP3 Context Information screen
18 PDP4 Context Information screen
19 Serving Cell paging parameters
20 Optional SYSINFOs
<screen_title> The requested screen title is written on the first line of each screen. See Table 3-109.
<screen_info> The requested screen information. See screens description, Table 3-110 through
Table 3-121.
Table 3-109: Title to Screen Mapping
<screen title> Description <screen num>
Serving Idle/PI Idle/Packet Idle mode; Serving Cell Information screen. 1
Serving CS/TBF Circuit Switched mode; Serving Cell Information screen. 2
Serving Misc Idle/Packet Idle mode; Miscellaneous Information
screen.
3
Uplink Transfer Dedicated/TBF modes; Uplink Data Transfer screen. 4
Dnlink Transfer Dedicated/TBF modes; Downlink Data Transfer screen. 5
Adjacent Cell x Neighbor Cell Information screen.
x - index cell.
6-11
Neighbors Neighbor Cells Summary screen. 12
Reselection Re-selection screen. 13