Technical information

Network
3-182 AT Commands Reference Manual August 5, 2008
+MFS: 2,1
//POWER CYCLE phone
AT+MFS? //Previous values restored after power up.
+MFS: 2,1
OK
AT+MFS=0
OK
AT+MFS?
+MFS: 0,1
OK
+MCELL, Motorola Cell Description
This command displays information about the Cellular Network. The information is divided
throughout 20 screens, each of them with different parameters data.
Command Type Syntax Response/Action Remarks
Set
+MCELL=<mode
>, <screen_num>
+MCELL: <screen_title>
<CR><LF><screen_info>
OK
or:
+CME ERROR: <err>
The Set command will return the
relevant <screen_info> according to
requested <screen_num>.
Read
+MCELL? OK
or:
+CME ERROR: <err>
The Read command just returns OK
and does nothing.
Test
+MCELL=? +MCELL: (list of
supported <mode>s),(list
of supported
<screen_num>s)
OK
or:
+CME ERROR: <err>
The Test command returns the
possible <mode> & <screen_num>
values.