Technical information

Network
3-178 AT Commands Reference Manual August 5, 2008
Note 1:
• If <index> is given but <oper> is left out, entry is deleted.
• If <oper> is given but <index> is left out, <oper> is put in the next free location.
• If only <format> is given, the format of the <oper> in the read command is changed.
Note 2:
• User is prevented from editing index No. 0. This index is reserved for the HPLMN
record and can not be modified.
• When entering a new item with an <index> to a full list, the G24 deletes the last item,
stores the new item in the requested entry, and shifts the rest of the list down.
• When entering a new item without an <index> to a full list, the G24 replaces the last
entry with the new item.
Note 3:MT may also update the User controlled PLMN selector with Access Technology list -
EFPLMNwAcT, automatically when new networks are selected.
Note 4:The Operator controlled PLMN selector with Access Technology EFOPLMNwAcT and
HPLMN selector with Access Technology - EFHPLMNwAcT can not be written since
the access conditions is Administrative.
Note 5:The command is implemented according to 3GPP TS 27.007 without acceptance in
attention the <GSM_AcT2>, <GSM_Compact_AcT2>, <UTRAN_AcT2>] bits since
the G24 device not using this bits to get the best PLMN.
Example
AT+CPOL=?
+CPOL: (001-032),(000-002)
OK
AT+CPOL?
+CPOL: 000,002,"42501"
OK
AT+CPOL=,0
OK
AT+CPOL?
+CPOL: 000,000,"IL ORANGE"
OK
AT+CPOL=?
+CPOL: (001-032),(000-002)
OK
AT+CPOL=1,2,"42502"
OK
AT+CPOL?
+CPOL: 000,000,"IL ORANGE"
+CPOL: 001,000,"IL Cellcom"
OK
AT+CPOL=1
OK
AT+CPOL?
+CPOL: 000,000,"IL ORANGE"
OK