Technical information

SMS
3-142 AT Commands Reference Manual August 5, 2008
Note: All AT+MEDT settings will be saved in FLEX and after power up will behave according
to the last setting.
Example
AT+MEDT=?
+MEDT: (0-31)
OK
AT+MEDT?
+MEDT: 17
OK
AT+MEDT=31 // Enable all tones
OK
30
Enable Enable Enable Enable Disable
31
Enable Enable Enable Enable Enable
Default value:
On Power Up - as previously saved in FLEX bytes.
Before using the set command for the first time, the default value is dependent on the
flex in use.
Table 3-84: +MEDT Parameters (Cont.)
<Parameter> Description