Technical information

Modem Configuration and Profile
3-252 AT Commands Reference Manual January 31, 2007
The following table shows the +MGEER parameters.
Table 3-172: +
MGEER Parameters
<Parameter> Description
<n> Indicates what format of cause needs to be printed. The default value is 2.
1 Returns numeric cause format.
2 Returns text cause format.
<cause> The PDP context activation reject cause.
0 Bad SIM (user authentication failed)
1 Roaming Not Allowed
2 Access Class Not Allowed
3 Network Failure
4 Insufficient Resource
5 All TID In Use
6 Link EST Failed
7 Activation Rejected By Network
8 Lower Layer Failure
9 Activation In Progress
10 Unspecified
11 Reactivation
12 Invalid QOS
13 MT AA Deactivation
14 MAX Timer Expiry
15 "Missing Or Unknown APN"
16 LLC Or SNDCP Failure
17 Feature Not Supported
18 CS Transaction In Progress
19 Primary NSAPI Being Deactivated
20 Primary NSAPI Inactive
21 Semantic Error In TFT Operatio
22 Syntactical Error In TFT Operation
23 Unknown PDP Context
24 Semantic Errors In Packet Filters
25 Syntactical Errors In Packet Filters
26 PDP Context Without TFT Already Activated
27 Feature Not Supported By Network
28 MT Modification In Progress
29 RAB Loss
30 Incompatible QOS Values
31 Activation Rejected Unspecified
32 Service Option Not Supported
33 Service Option Not Subscribed
34 Service Option Temporarily Out Of Order
35 Operator Determined Barring
36 QOS Not Accepted
37 NSAPI Already Used
38 Cause Protocol Error
254 Unspecified
255 No Information Available