Technical information

Interface Connector Specifications
62 G24-L Module Hardware Description November 15, 2008
Interface Connector Specifications
The G24-L uses a single 70-pin, 0.5 mm pitch, board to board connector for the application
interface, which is available in 2 stacking height versions, as described in Table 4-1.
Figure 4-2 shows the G24-L interface connector.
Figure 4-2: G24-L Interface Connector
Table 4-2 describes the G24-L interface connector characteristics.
Table 4-1:
G24-L interface connector options
G24-L Connector Mating Connector Stacking Height
Molex 53748-0708 Molex 52991-0708 3.0 mm
Table 4-2: Interface Connector Specifications
Parameter 53748 (3.0 mm)
Contacts 70
Rows 2
Pitch 0.5 mm
Maximum Current 500 mA
Maximum Voltage 50 V
Contact Resistance 50 mΩ maximum
Insulation
Resistance
100 MΩ minimum
Durability 30 mating cycles
maximum
Stacking Height 3.0 mm
Mates with Molex 52991-0708