Technical information

Battery Charger Interface
48 G24-L Module Hardware Description November 15, 2008
The battery and charger interface signals are described in the table below:
The battery charger connectivity is depicted in Figure 2-26.
Figure 2-26: Battery and Charger Interface Connectivity
Table 2-23: Battery and Charger Interface Signals
Pin # Signal Name Description
1-4 GND Module Ground
Connect to battery BATT(-) contact.
5-8 VCC
Module Supply
Connect to battery BATT(+) contact.
10
51
VBUS
IGN
External charger input
VBUS and IGN signals are connected
internally in the G24-LC.
47 ADC3
Battery temperature measurement.
Connect to thermistor at battery
THERM contact.