Technical information

Applicable Documents
x G24-L Module Hardware Description November 15, 2008
Applicable Documents
• G24-L Developer's Kit - 6802984C10
• G24-L AT Commands - 6802983C95
Regulatory Requirements
The G24-L module is compliant with applicable FCC, IC and European R&TTE requirements.
The integrated system incorporating the G24-L module may be subject to further regulations and
standards. Motorola strongly recommends that the system integrator seeks professional advice
regarding the regulations and standards that apply to their product.
The Federal Communications Commission (FCC) requires application for certification of digital
devices in accordance with CFR Title 47, Part 2 and Part 15. This includes Electromagnetic
Energy Exposure (EME) testing. As the G24-L modem is not a standalone transceiver but is an
integrated module, the G24-L cannot be tested by itself for EME certification. It is, however, the
integrator’s responsibility to have the completed device tested for EME certification.
The module is compliant to European R&TTE directive requirements; however the complete
system (host plus G24 module) may be subject to R&TTE or other directives (for instance the
EMC directive 2004/108/EC). Motorola strongly recommends that the system integrator seek
professional advice regarding the applicable standards and directives, and most efficient route to
demonstrating compliance, and required product markings.
The G24-L module is compliant to FCC, IC and R&TTE requirements allowing use within
Europe and North America. Use in other regions may require regional "type approvals" which
the manufacturer of the final product integration or reseller will be responsible for procuring.
Many regional type approvals are based upon compliance to FCC, R&TTE, ETSI and other
standards that the G24-L is compliant with. It is strongly recommended that professional advice
be sought before placing the finished integrated product on the market to establish local approval
and marking requirements.
Safety Statement and Requirements
Certain safety precautions must be observed during all phases of the operation, usage, service or
repair of any cellular terminal or mobile incorporating the G24-L module. The integrator is
advised to consider the following general cautions in the context of their integrated system
incorporating the G24-L module, and to provide the end user with the applicable warnings and
advice of safe operation of the equipment.
Failure to comply with these precautions violates safety standards of design, manufacture and
intended use of the product. Motorola assumes no liability for customer failure to comply with
these precautions.
• The G24-L must be operated at the voltages described in the technical documentation
• The G24-L must not be mechanically nor electrically changed. Use of connectors should
follow the guidance of the technical documentation
• The G24-L is designed to meet the EMC requirements of EN301 489-1 and EN301 489-7 for
R&TTE devices using GSM
• When integrating the G24-L into a system, Motorola recommends testing the system to
EN301 489-1 and EN301 489-7 for R&TTE devices using GSM
• The G24-LC meets the safety requirements of EN60950