Technical information

November 15, 2008 G24-L Module Hardware Description ix
Preface
Note: All references to G24-L also apply to G24-LC, except where otherwise
noted.
Manual Scope
This manual provides the electrical, mechanical and environmental requirements for properly
integrating the G24-L module in a host application.
This manual gives a complete set of hardware features and functions that may be provided by
G24-L. The availability of any feature or function, which is described in this manual, depends on
the hardware revision and software version of a specific G24-L model, and also the capabilities of
the host application which must provide a user interface and control the module via AT
commands.
The parameters and values provided in this manual are defined under typical conditions. These
values may vary when subject to different conditions, such as SW version, network status,
application settings and environmental conditions.
Target Audience
This manual is intended for all members of the integration team who are responsible for
integrating the G24-L module into the host OEM device, including representatives from
hardware, software and RF engineering disciplines.
Manual Organization
This manual contains the following chapters:
• Chapter 1—introduces the G24-L unit and provides important safety instructions.
• Chapter 2—provides a detailed hardware description of the blocks and components
comprising the G24-L.
• Chapter 3—describes the pin assignments for G24-L connectors.
• Chapter 4—describes G24-L mechanical specifications and requirements.
• Chapter 5—provides contact information for Motorola Service Support and Customer
Assistance.