Specifications

S register
S6, S8 and S18, assed
+MIPCONF
The parameters: <keep_alive_timeout>,
<keepalive_interval>, <keepalive_probes>,
removed
+MMAD
1) Only 2 converters
2) Average not supported
+MAPATH/ +MAVOL
Alert speaker, removed
Dial from PB
Only full equally string can be dial
Currently PB
feature is not
supported
+MIPSEND
when reached the watermark an unsolicited
report of +MIPPUSH will be display
Audio
While in advance mode, all basic commands
are not block and will not return error. Only
MAPATH will invoke advance mode.
+CLVL / +MAVOL
The level value is added to the value was set
in the other command and does not replace
this value
+CCWA
When no <class>, the default is 1
+CGPRS
Value 2(EDGE), removed
D, Dial
Limit of 54 digits
+ICF
Values: 4,5,6,8 removed
+CSMS
Parameter <service> updated
+CNMA+CNMI
Commands updated
+CSCA
Command updated
+IPR
Values 300,600 removed
+CGCLASS
Values CC and CG added
+CSCS
CS 8859-1 removed
+CSCS
HEX character set is treated as GSM
+MIPSEND
Max size to send 504 bytes
+CFUN
Remove second parameter <rst> from Set
Mode
+CFUN
When disable phone transmit & receive RF
the module perform power down
S94
0 = Disable sidetone
+CPWD
All barring services use the same password
S24
The G30 will wake up from sleep mode and
timer will reset only in case the DTE wakes
up the module. In case of a report to the
terminal the G30 continue to sleep
+CGDCONT
Parameter <cid> range is (1-2)
+MCELL
Screens updated
+CMER
Command parameters updated
+CRSL
0 = lowest volume