Specifications

AT Commands – Updated
+MMICG
Range supported is 0-15
ATI[n]
Updated
+CRTT
16 Ring Tones instead of 41
Character Set
Replace ASCII with IRA. UTF8 Removed
Baud rate
Value 13 (460800), Removed
FAX
Class 2
+CPBS
1) AD, DC, EN, MC and RC – Removed
2) LD – Added
3) Replace SD with SN
Currently PB
feature is not
supported
+CPBS / +CPMS
ME/MT removed
Currently PB
feature is not
supported
+CSMS
Value 128, removed.
+CIND/+CIEV
Different indications
+CCWA
Indication will appear only once.
GPIOs
Update to 9 GPIO pins
S94, S96
Supported range, enlarged
FTP
Use different sockets that the 4 for MIPOPEN
+FTPRETR
In case of result 0 (operation failed) the FTP
connection is close
+CFUN
1) Range updated.
2) <rst>=0-<fun> value won’t be saved in the
flex/<rst>=1-<fun> value will be saved in the
flex
+MCI
Cell ID, LAC, Removed
+CLCK
Will support subsidy lock feature
MUX
Advance mode, Removed
MUX
At commands per channel, Removed
+CNMI
Range updated
+CNUM
Support up to 2 strings
Q, E, X
Read Mode, removed
S register
Registers: 14,21,22,31,36,39,40 and 41 –
Removed
+CEER
Set and Read Mode, removed
+CBST
Speeds 14(14400 bps (V.34), 68 – 2400 bps
(V.110 or X.31 flag stuffing)
and 75 – 14400 bps (V.110 or X.31 flag
stuffing), removed
+CBST
Value 1 from parameter <name> removed
+GCAP
Read Mode, added