Specifications

Telit G30 has an internal optional SIM chip and external interface to SIM connector same as
G24-L.
In addition G30 module supports:
When external SIM is connected:
 Connect all SIM signals to the external SIM pins(VSIM , SIM_RST, SIM_IO,
SIM_CLK, SIM_PD_n)
 Verify that eSIM_RESET (pin 56) is left unconnected
When eSIM is used:
 Verify that the following signals are not connected: VSIM, SIM_IO, SIM_CLK
 Connect SIM_RST pin to eSIM_RESET pin via O ohm resistor
 Connect SIM_PD_n pin to GND via O ohm resistor in case the SIM detection is
disabled by SW (+MSMPD command)