User`s guide

54
Common Radio Features
Sending a Call Alert Page
Follow these steps to send a call alert page:
1 Press the PTT button.
If you hear five tones, the system has received the ID number.
The radio you called is on the air and has received your page.
Your radio automatically returns to the home display.
If you hear only one tone, the system has received the ID
number, but the radio you are paging is not on the air. Proceed
to the next step.
2 To try paging the number again, press the PTT button.
OR
To hang up, press the O button to hang up. The radio returns
to the home display.
Note: If you hear a low-pitched alert tone
and the display shows NO
ACKNOWLEDGE, the radio you called
did not acknowledged the Call Alert
within six seconds. Try again or press the O
button to exit.