User`s guide

Going Directly to an ID Number in the Call List Sending a Private Conversation Call
Sending a Call Alert Page Answering a Private (and Enhanced Private) Conversation Call Answering a Call Alert Page
Automatic Multiple Site Selection (AMSS) Viewing the Current Site and Forcing a Site Change Locking and Unlocking a Site
1 Press > until the display shows the CALL (PAGE for
Call Alert) softkey.
2 Press m below CALL or PAGE (or use the
preprogrammed quick-response button). The display shows the last ID transmitted or received. In the case of private call, the display shows RECEIVED ID, or the ID number (Private Conversation II).
3 Press < or > to enter the call list. 4 Press < or > to scroll to the desired list entry. 5 Press the 0 to 9 keys to enter the location number.
The display alternately shows the name and ID number associated with the entry. If there are 10 or more list entries, the display shows ID LOC#X_. Use the numeric keypad again to enter the second digit of the location number.
6 Proceed to step 1 of “Send a Private Conversation
Call” or “Send a Call Alert Page.”
1 Press the PTT button to transmit the displayed ID
number. If the radio you are calling is not in service, the display shows NO ACKNOWLEDGE. If the other party does not
answer within 20 seconds, the display shows NO ANSWER.
2 Press O to exit private call, or press the PTT button
to speak.
3 Press O to hang up.
The radio returns to the home display.
1 Press the PTT button to transmit the displayed ID
number. If the radio you are paging cannot be reached, you hear only one beep.
2 Press the PTT button to try again, or press O to
hang up. If the radio you called has received your page, you will hear five beeps. The radio returns to the home display.
When a private call is received, the display alternately shows CALL RECEIVED and the current mode name. The
the F annunciator and the green LED flash. You hear two alert tones. 1 Press > until the display shows the CALL softkey,
or press the preprogrammed call response button.
2 Press the call response button again, or press the
m button below CALL. The display shows the last ID number transmitted or received. In the case of private call, the display shows RECEIVED ID, or the ID number (Private Conversation II).
3 Press the PTT button to answer the call.
If you hear a busy tone, the system is busy.
4 Press O, m below CALL, or the preprogrammed
call response button to hang up. The radio saves the caller’s ID number and returns to the home display.
When a call alert page is received, the display alternately shows PAGE RECEIVED and the current mode name. The the F annunciator and the green LED flash. You hear a four-beep tone.
1 Press the PTT button to answer the page.
The display shows the current mode. The LED, alert tone, and F turn off. The ID is saved as the last ID number received.
2 Press the PTT button to talk, release to listen.
Everyone who belongs to the talkgroup will hear your transmission. OR If you want to respond to the page with a Private Call:
a. Press > or the preprogrammed call or call
response button until the display shows CALL.
b. Press m below CALL.
The display shows the ID of the paging radio.
3 Proceed to step 1 of “Send a Private Conversation
Call.”
1 Press the search button momentarily.
The display shows the number of the site if the radio is locked (or SCANNING SITE if the radio is scanning).
2 Press and hold down the search button while the
radio scans for a new site. The radio returns to the home display.
1 Press > until the display shows SITE.
2 Press m below SITE. The display shows the
current lock state, and the LOCK and UNLK softkeys.
3 Press m button LOCK or UNLK. The radio saves the
new setting and returns to the home display.