User`s guide

ASTRO XTL 5000 Digital Mobile Radio with W3 Control Head 39
Common Radio Features
Programming a Scan List
This feature lets you change the channels that are included in the
current scan list and their priorities.
1 Press < or > to scroll to PROG.
2 Press the m button below PROG.
3 Press the < or > buttons to find
SCAN.
4 Press the m button below SCAN to access the scan list.
The display shows the SEL, DEL, and RCL sofkeys. It also shows
a flashing I (the programming-mode annunciator) until you
exit list programming mode.
5 Press the < to > buttons to scroll through the available
zones.
6 Press the MODE rocker switch to scroll through the different
modes (channels) of a zone.
OR
To directly access that channel of the current zones, use the
keypad to enter a channel’s numeric location in the list.
Note: If the channel is a member of the scan list, the display
shows G (the scan status annunciator).
7 Press the m button below SEL to add
or remove a channel from the scan list
or to change a scan list member’s
priority. (The S1, or Select, button also
serves the same function.)