User`s guide

Dynamic Priority Change (Conventional Operation Only) Viewing a Scan or Phone List Programming a List
Telephone Operation
Answering a Telephone Call Calling the Last Number Dialed
Making Delayed-Access Calls
1 Press the preprogrammed Dynamic Priority button
with the radio locked onto the Priority 2 mode. (The Priority 1 mode cannot be modified.) You hear a valid key-press chirp.
2 To resume scanning the Priority 2 mode, turn scan off
and then on again.
1 Press < or > until the display shows the VIEW
softkey.
2 Press m below VIEW until the display shows the
SCAN or PHON softkey.
3 Press m below SCAN or PHON. 4 Press > to scroll through the list entries. 5 Press O or the PTT button to exit the list.
The radio returns to the home display.
1 Press < or > until the display shows the PROG
softkey.
2 Press m below PROG until the display shows the list
softkey options (PROG, CALL, etc.).
3 Press m below the type of list you wish to access.
The display shows a flashing I indicator.
4 Press < or > until you reach the list entry you
wish to edit, or enter the number of the item in the list using the keypad.
5 Press the preprogrammed list edit (S2) button. 6 Use the numeric keypad to modify the entry. 7 Press the preprogrammed S2 button to save your
changes.
8 Press O to exit programming mode and return to
the home display.
You hear a telephone-like ringing sound. The display alternately shows PHONE CALL and the current mode name. The display shows a flashing F. 1 Press the programmed phone or call-response
button. The F annunciator disappears from the display.
2 Press the PTT button to talk; release it to listen. 3 Press O or the preprogrammed phone button to
hang up. The radio returns to the home display.
1 Press < or > (or the preprogrammed button)
until the display shows the PHON softkey.
2 Press m below PHON.
The display shows the last phone number dialed. With immediate access, the display shows PLEASE WAIT; otherwise, press the PTT button. Trunked Telephone Operation: The display shows NO
PHONE; you hear a low-pitched tone which indicates the radio is out-of-range or interconnect is not in service. If the display shows PHONE BUSY, interconnect is in use; the radio will re-dial the number when interconnect is available. If you hear a dial tone, this indicates access was successful.
3 Proceed to step 1 of “Transmit a Phone Call.”
1Press < or > until the display shows the PHON
softkey, or press the preprogrammed phone button.
2Press m below PHON. The display shows the last
phone number dialed.
3 Use the numeric keypad to enter the desired phone
number. To make a delayed-access call to a number in the phone list: Press < or > to enter the phone list. The display alternately shows the name and phone number associated with the entry. OR To make a delayed-access call to a number at a location in the phone list: Press < or > to enter the phone list. Then press a location from 1 to 19 corresponding to the number you wish to call. The display alternately shows the name and phone number associated with the entry.
4 Press the PTT button. The display shows PLEASE
WAIT. If you do not hear a dial tone, press O to hang up and return to Step 1. Trunked Telephone Operation: The display shows NO PHONE; you hear a low-pitched tone which indicates the radio is out-of-range or interconnect is not in service. The display shows PHONE BUSY indicating interconnect is in use; the radio will re-dial the number when interconnect becomes available. If you hear a dial tone, this indicates access was successful. The display shows the last phone number dialed.
5 Proceed to step 1 of “Transmit a Phone Call.”