User`s guide

Trunking Features

Reprogramming Request

This feature allows you to tell the dynamic regrouping console you

want a new dynamic regrouping assignment.

1 Press > to scroll to RPGM.

Note: If your radio has a programmed reprogram-response

button, press it for quick access to the reprogram request

feature.

2 Press the m button below RPGM.

The display shows REPROGRAM RQST on

the first line, and the reprogram request is

sent to the dynamic regrouping console.

You hear five tones if the console

acknowledged your request. Your radio

returns to the home display.

You hear one tone if the system received

the request, but the console did not

acknowledge it. Go to the next step.

3 Press the PTT button to transmit the request, or press the O

button to hang up and return to the home display.

Note: If the dynamic regrouping console

fails to acknowledge your request in

six seconds, the display shows NO

ACKNOWLEDGE and you hear a low-

pitched alert tone. Repeat the

reprogram request, or press the O

button to hang up.