User guide

Answer a Phone Call in Trunked Modes
Make a Call (Trunked Modes Only)
Alarm and Call
Send a Status Transmission
Send a Direct-Entry Keyboard Status
Transmission
Initiate an Enhanced Private Conversation Call
Initiate a Private Conversation II
Initiate a Call Alert Page
Answer a Call Alert Page
Answer a Private Conversation Call
When a call is received, ringing tones are heard from
the speaker, and
PHONE is displayed.
1 Press PHON and begin your conversation.
2 Press Home to hang up.
A tone sounds and the display alternates between
EMERGENCY and the zone/channel.
1 Press the PTT button and talk.
2 After completing the call, press and hold the
emergency actuator until a tone sounds to return to
normal operation.
After ACK RCVD is displayed, your radio has priority
voice-channel access.
1 Press the PTT button and talk.
2 After completing the call, press and hold the
emergency actuator until a tone sounds to return to
normal operation.
1 Press Sts. The last acknowledged status or first
status name is displayed.
2 Press the Mode rocker switch or use the keypad to
select other statuses.
3 Press Sel or the PTT button to send the
transmission. The display flashes the
PLEASE WAIT
until the dispatcher acknowledges, at which time alert
tones sound and
ACK RCVD is displayed. The radio
then returns to normal operation.
Press the appropriate Sts # button that you wish to
send. The associated indicator blinks until an
acknowledgment is received, then it lights steadily.
1 Press Sel or the PTT button. A single tone sounds
and the display changes to
PLEASE WAIT, followed
by telephone-type ringing if the receiving unit is in
service.
2 If the receiving unit answers, press the PTT button to
identify yourself and proceed with your call.
OR
If the called unit does not respond, press Sel or the
PTT button again to leave a Call Alert page message
and your ID.
A single tone followed by four tones sounds if the
called unit acknowledges the page.
1 Press the PTT button to initiate a Private
Conversation I or II call.
2 Pause for a second, then begin the conversation.
3 Press Home or Call to hang up.
1 Press the Page button.
2 Follow the instructions for initiating an Enhanced
Private Conversation to select a unit ID.
3 Press Sel or the PTT button to send a Call Alert page
to the displayed ID,
OR
To send a Call Alert page following an Enhanced
Private Conversation attempt, follow the instructions
for sending an Enhanced Private Conversation call.
Four tones sound and PAGE RCV flashes on the
display.
1 Press either the microphone PTT button or the Call
button to clear the Call Alert state.
Two tones sound and CALL RCV flashes on the
display.
1 Press the Call button.
2 Press the microphone PTT button, and speak into
the microphone.
3 Press Home or Call to hang up.