User guide

Trunking Operation

Note: If the number contains a programmed pause, the dialing

pauses briefly when

P is displayed. After the brief pause, the

rest of the numbers are dialed.

4 When your party answers,

press the PTT button to talk,

and release it to listen.

Note: If you are out of range of the trunked system, NO PHONE is

displayed, and a continuous low-pitched tone sounds. Press

the HOME or Phon button to resume normal operation.

If the trunked phone interconnect is in use or the phone

interconnect is out of service, a telephone-type busy tone

sounds, and the display shows

PHON BSY (W7) or PHONE

BUSY

(W9). Your number is automatically dialed when the

phone interconnect becomes available. If you hang up, you

lose your place in the queue.

PHON BSY (W7) or PHONE BUSY (W9) is displayed with a

low-pitched tone rather than a telephone-type busy tone, the

call is not queued. You must hang up and try again.

If your radio is programmed for live overdial, every digit

pressed after the phone call is established is sent to the

telephone system.

If your radio is programmed for buffered overdial, the digits

pressed are entered into the radio’s memory, and they are all

sent together when the PTT button is next pressed. You

cannot send digits and talk on the same PTT button press. If

you press the PTT button to send the digits, you must

release the PTT button and press it again to transmit.

5 When the call is completed,

press the HOME or Phon

button to hang up and return

to normal operation.