Service manual

Guide to ASTRO™ Digital Radios
R07.01.00
R07.01.00 continued…
XTS 3000™ / ASTRO Digital Saber™ trunked priority
talkgroup scan problem. (missed calls) SRN1330.
XTS 3000™ displays "REMOTE" on screen when
removed from XTVA. Upgrade to R07.01.00 or
later. SRN1320
R07.01.01 – R07.07.00
ASTRO Digital Saber™, XTS 3000™ Equipped with
DVP-XL may experience missed words. SRN1368
R07.01.01 and newer
Transmit Audio Gain Control (AGC) is introduced.
This is the most significant enhancement to digital
audio on ASTRO™ digital systems ever
implemented. SRN1370 (April 2002) Support for
Soft-ID decode in ASTRO Digital Saber™ and XTS
3000™.
R07.12.00-R07.14.00
ASTRO Digital Saber™ and XTS 3000™. Radio re-
affiliates every few seconds when in talkgroup
scan. SRN1433
R07.20.00 (fixes)
XTS 3000™ may experience premature low-battery
alerts/distorted or no TX audio when used with
IMPRES “smart” battery packs NNTN4435,
NNTN4436, NNTN4437, HNN9031, HNN9032, and
NTN9862. SRN1463
R07.22.01 and newer
ASTRO Digital Saber™ and XTS 3000™ gain support
for Analog Radio ID Display on APCO-16 trunking
systems. Must be used with CPS R04.01.02 or
newer.
R07.23.00 and newer
When ordering replacement LCD display
(5185633C42), this firmware version or newer
must be installed. New LCD requires new drivers.
R07.70.00 and newer
Support for 800 MHz rebanding.
R07.71.00
Latest XTS 3000™ and ASTRO Digital Saber™ host
firmware release. 03/2007.
R08.00.00 – R11.01.02
ASTRO Digital Spectra VHF 146-174 "K" range:
When the PTT is pressed and the transmit LED is
lit, the unit acts like it is keyed up but does not
transmit any RF power. SRN1325
R09.50.00-R11.06.02
ASTRO Digital Spectra™ is slow to unmute in scan
or has poor sensitivity in scan when in priority scan