User`s guide

97
Change/View Menu Press F4 at the MAIN MENU to access the CHANGE/VIEW MENU.
The CHANGE/VIEW MENU is a multi-level menu. Its sub-menus are
used to change or view codeplug features and option configurations.
All codeplug parameters are classified as Radio Wide, Conventional or
Trunking. The CHANGE/VIEW MENU functions allow you to access
each category.
A codeplug must be loaded into your computer’s memory (using GET/SAVE/
PROGRAM MENU functions) before you can access the CHANGE/VIEW
screens. You may change or view an archive file without having a radio
connected. CHANGE/VIEW functions do NOT actually modify the
radio’s codeplug data. Instead, they modify a copy of the data retrieved
from the codeplug or archive file.
Note: If a specific feature was not purchased with the current radio
model, you will NOT be able to access the corresponding data field or
screen for that feature. Refer to your Radio Catalog Sheets or Radio
Service Manual for radio model descriptions and features.
Note: If the radio being programmed is “ASTRO READY” (that is,
supports analog operation only), you will NOT be able to access
ASTRO-related screens and options.
After all change/view modifications are completed, you MUST return
to the GET/SAVE/PROGRAM MENU and program the changes back
into the radio or save them to a new archive file. Otherwise, the
modifications will be lost when you turn off your computer or load
another codeplug into memory.
D
MOTOROLA Radio Service Software Select Function F1 - F10.
ASTRO Model:
MAIN:CHANGE/VIEW
CHANGE/VIEW MENU
----------------
F1 - HELP
F2 -
F3 - Radio Wide Buttons, Switches, Display, Scan, Phone
F4 - Trunking Systems, Personalities, Call Lists, Options
F5 -
F6 - Conventional Systems, Personalities, MDC, Options
F7 -
F8 - Zone/Channel Assignment
F9 -
F10 - EXIT, Return to Main Menu
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP RADIO TRUNK CONV ZONE/CHN EXIT
CONFIG DATA DATA ASSIGN