User`s guide

91
Programming the
Radio Codeplug
(Requires RIB)
From the MAIN MENU, press F3 and then F8 to bring up this screen.
This screen allows you to program the radio. A radio interface box
(RIB) is required to perform this operation. To program this radio, you
must first read the radio using the F2 READ RADIO function or read an
archived codeplug using the F3 Get Archive function.
The serial number of the connected radio must be identical to the one in the
serial number field on the RSS and the PROGRAMMING HISTORY screen
(F3/F9). If the serial numbers are different, programming will be
aborted.
Note: The time required to PROGRAM a codeplug will depend
directly on your computer type and the size of the codeplug
being programmed.
The status of the programming operation will be displayed on the
screen.
Field Definition
Programming Codeplug Block This is the number of blocks that have been programmed. The status
bar shows the relative value of the number of blocks programmed so
far compared to the total number of blocks to be read.
CH
MOTOROLA Radio Service Software
ASTRO Model:
MAIN:GET/SAVE/PROG:PROGRAM RADIO
PROGRAM RADIO CODEPLUG
----------------------
Programming Codeplug Block 1 of 34
0% 100%
|----+----+----+----+----+----+----+----+----+----+----+----|
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10