User`s guide

Saving Codeplug

Data to an Archive

File

From the MAIN MENU, press F3 and then F7 to access this screen.

The SAVE ARCHIVE function is used to create (or update) an archive

copy of the codeplug information onto a diskette or hard disk.

Note: You are strongly encouraged to make an archive copy of

every radio installed or serviced in order to be able to quickly

restore customer information in case of a codeplug failure.

Function Key Descriptions

F2 - CHANGE ARCHIVE Used to specify the directory path where the archive ﬁle is to be

located. The default archive path will always be the default path

speciﬁed in the CONFIGURE PATHS AND PORT screen (F9/F3).

F8 - SAVE ARCHIVE Saves the archive ﬁle to the path speciﬁed (or to the default path if no

path is speciﬁed). If you are updating an archive ﬁle, the computer will

prompt you to press the F2 key to prevent accidentally overwriting the

ﬁle.

Note: Do NOT press F8 until you have entered the customer

identiﬁcation information.

MOTOROLA Radio Service Software Enter Archive Path.

ASTRO Model:

MAIN:GET/SAVE/PROG:SAVE FILE

Archive: C:\MRSS\ASTRO\ARCHIVEM

SAVE CODEPLUG DATA TO ARCHIVE FILE

----------------------------------

Archive Filename......mobcw3.arc

Model Number..........D04UJH9PW3AN

Serial Number.....................

Last Programmed.........9512191947

Program Source.............Factory

F1 F2 F3 F4 F5 F6 F7 F8 F9 F10

HELP CHANGE SAVE EXIT

ARCHIVE ARCHIVE