User`s guide

Get Codeplug Data

From Archive File

From the MAIN MENU, press

twice to access this screen.

The GET ARCHIVE function is used to retrieve an archive ﬁle from a

diskette or hard disk. Once retrieved, the ﬁle may be modiﬁed using

the CHANGE/VIEW functions or programmed into a radio.

Note:

The Archive directory will be ARCHIVEP for ASTRO

portables, or ARCHIVEM for ASTRO mobiles.

Press

Tab

to select the serial number of the radio to be retrieved. The

function key is used to retrieve the selected ﬁle.

Function Key Descriptions

- CHANGE ARCHIVE

Used to specify the directory path where the archive ﬁle is to be saved.

The default archive path will always be the default path speciﬁed in

the SETUP CONFIGURATION MENU (

- DELETE SELECTED

Deletes the selected archive ﬁle. You will be prompted before the ﬁle is

actually deleted.

Note: It is NOT possible to retrieve the ﬁle once it has been

deleted.

- CHDIR UP &

- CHDIR DOWN

Used to navigate up and down the directory tree. The changes to the

directory are highlighted on the screen.

- GET ARCHIVE

Used to get the archive ﬁle highlighted on the screen. If this function

is executed successfully, the RSS will display: “Archive File Read

Successfully” in the upper right corner of the screen, and the archive

ﬁle will be loaded. Only the speciﬁed path will be searched.

Field Deﬁnition