User`s guide

Reading Codeplug

Data From Radio

(

Requires RIB

)

From the MAIN MENU, press

and then

to access this screen.

Note:

You may read the codeplug from the radio or from the

archive disk. Refer to the following page for instructions on

reading codeplug data from an archive disk.

Once in the READ RADIO CODEPLUG screen, a series of status

messages will appear in the upper right corner of the screen. If a

communication error occurs, a pop-up window will be displayed. If no

errors occur, the center of the screen will display the progress of the

codeplug reading activity.

Note:

The read process will take approximately one minute, but

may vary based on the processing power of your computer and

the size of the codeplug being read.

After the codeplug is read, it will be checked for valid serial number,

model number, checksums, etc. and the RSS will automatically return

you to the GET/SAVE/PROGRAM MENU.

Field Deﬁnition

Reading Codeplug Block

This is the number of blocks that have been read. The status bar shows

the relative value of the number of blocks read so far compared to the

total number of blocks to be read.

MOTOROLA Radio Service Software

ASTRO Model:

MAIN:GET/SAVE/PROG:READ RADIO

READ RADIO CODEPLUG

-------------------

Reading Codeplug Block 1 of 34

0% 100%

|----+----+----+----+----+----+----+----+----+----+----+----|

F1 F2 F3 F4 F5 F6 F7 F8 F9 F10